AQWAA

AQWAA is medium textured water based decorative paint acrylic based coating
reinforced with coarse sand aggregates. Suitable for exterior surfaces of plaster,
concrete, brick, masonry, asbestos, cement panels and suitable primed wood.
This is an excellent material to cover minor cracks and imperfections present in
the surface. This is suitable for the harsh Qatar weather. It comes in a variety for
shades.
Recommended use
For use on exterior surfaces like concrete, cement plaster etc. where a medium
textured finish is required that can cover minor substrate imperfections.
Substrate Applicable: Cement plaster, concrete, rendered surfaces, block work,
gypsum board, stucco filler etc.
Surface preparation
The surface must be clean, dry, fully cured and totally free from dirt, dust, loose
particles and other contaminations like oil, grease and chemicals.  Remove all
loose particles, sharp edges, nibs etc. by abrading the surface with sand paper,
rubbing stone, stiff bristle brush etc. and remove the accumulated dust.
Typical paint system

On Concrete & Plaster 

1 coat Wallgrace Acrylic Emulsion Primer or Wallgrace Primer
2 coats AQWAA (Use Block Filler for minor filling/smoothening after the primer)
Optional 1 coat of glitter (as desired by customer to give a glittery look)